Difference between revisions of "Firmware Update"
From UPHCC
(updated link) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 7: | Line 7: | ||
== Firmware Uploading On Windows == | == Firmware Uploading On Windows == | ||
* download and install Microchip's MCHPFSUSB USB Framework. This package includes their USB Firmware bootloader application. | * download and install Microchip's MCHPFSUSB USB Framework. This package includes their USB Firmware bootloader application. | ||
| − | ** http://microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2124¶m=en532204&page=wwwFullSpeedUSB | + | ** <strike>http://microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2124¶m=en532204&page=wwwFullSpeedUSB</strike> (old link) |
| + | ** http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2680&dDocName=en537044 | ||
* run "PICDEM FS USB Demo Tool" (launched with PDFSUSB.exe), make sure you are in tab "Bootload Mode" | * run "PICDEM FS USB Demo Tool" (launched with PDFSUSB.exe), make sure you are in tab "Bootload Mode" | ||
** click "Load HEX File" to load the firmware hexfile downloaded in above steps | ** click "Load HEX File" to load the firmware hexfile downloaded in above steps | ||
Latest revision as of 23:06, 28 April 2010
To install/update the firmware for the UPHCC-* series of boards,
- first download the appropriate firmware for the board and/or application,
- run the firmware uploader program for your platform (see below)
- enter bootloader mode (aka. firmware update mode) on UPHCC-usb,
Firmware Uploading On Windows
- download and install Microchip's MCHPFSUSB USB Framework. This package includes their USB Firmware bootloader application.
- run "PICDEM FS USB Demo Tool" (launched with PDFSUSB.exe), make sure you are in tab "Bootload Mode"
- click "Load HEX File" to load the firmware hexfile downloaded in above steps
- click 'Program Device'
Firmware Uploading On Linux
- download, build, and install fsusb
- make sure you run the program with proper rights to the USB devices. You might have to run it either as root or suid root.
- commandline: ./fsusb --program firmware_hexfile.hex
Entering Bootloader Mode
- turn on UPHCC-usb
- press RESET button on UPHCC-usb quickly a few times (at least twice; it is important that the time between the last two presses is less than 1/2 of a second)
- the bootloader should come up with USB Vendor:Product IDs of: 04d8:000b
- The UPHCC application firmwares have a Vendor ID of 16c0 and a Product ID in the range of 096a to 0973.