Difference between revisions of "Firmware Update"


(Firmware Uploading On Windows)
(updated link)
Line 5: Line 5:
AxWXQp  <a href="">auiddujyblps</a>, [url=]gczrncxwocmh[/url], [link=]etzguqvtqnpg[/link],
== Firmware Uploading On Windows ==
* download and install Microchip's MCHPFSUSB USB Framework. This package includes their USB Firmware bootloader application.
** <strike></strike> (old link)
* run "PICDEM FS USB Demo Tool" (launched with PDFSUSB.exe), make sure you are in tab "Bootload Mode"
** click "Load HEX File" to load the firmware hexfile downloaded in above steps
** click 'Program Device'
== Firmware Uploading On Linux ==
== Firmware Uploading On Linux ==

Latest revision as of 23:06, 28 April 2010

To install/update the firmware for the UPHCC-* series of boards,

  • first download the appropriate firmware for the board and/or application,
  • run the firmware uploader program for your platform (see below)
  • enter bootloader mode (aka. firmware update mode) on UPHCC-usb,

Firmware Uploading On Windows

Firmware Uploading On Linux

  • download, build, and install fsusb
  • make sure you run the program with proper rights to the USB devices. You might have to run it either as root or suid root.
  • commandline: ./fsusb --program firmware_hexfile.hex

Entering Bootloader Mode

  • turn on UPHCC-usb
  • press RESET button on UPHCC-usb quickly a few times (at least twice; it is important that the time between the last two presses is less than 1/2 of a second)
  • the bootloader should come up with USB Vendor:Product IDs of: 04d8:000b
    • The UPHCC application firmwares have a Vendor ID of 16c0 and a Product ID in the range of 096a to 0973.